Custom aroma stone gift set order guide
LOXAuthor:LOX
Category: Corporate gifts ·
BEHIND EVERY CUSTOM PIECE
You see an aroma stone.
We see a complete product development process.
A custom aroma stone takes more than putting artwork into a mould. From translating a flat concept into a manufacturable 3D structure to masters, silicone moulds, casting, finishing and inspection, each step affects the next and determines whether we can deliver consistently.
Understanding the custom cost
The custom fee covers more than materials. It turns an idea into something that can be made, reproduced and delivered with confidence.
Unusual shapes, dense detail and undercuts make mould-making and demoulding more difficult. Even changing a logo's size, thickness or position can affect the 3D file, master, silicone mould, gift-box insert and production method. Confirming your requirements before sampling saves time and protects the design's quality.
STEP 01
3D modelling: turning a concept into a workable structure
We build a 3D model from your logo, sketch or reference image and assess thickness, proportions, balance, rounded edges, fine-line depth, text legibility, the back and demoulding direction. This involves balancing design with manufacturing, rather than simply making flat artwork three-dimensional.
STEP 02
3D printing: making a master to verify the digital design
After approving the 3D file, we resin-print a master. Print orientation, supports and layer height affect the surface and detail. Failed prints, distorted parts or incomplete details require adjustments and reprinting. This print is the starting point for mould quality, rather than the final aroma stone.
STEP 03
Finishing the master: every mark can be reproduced
The printed master is washed, post-cured, separated from its supports, filled, finely sanded and finished. Layer lines, support marks, chipped corners and pits may be copied into the silicone mould and every finished piece. Master finishing can therefore take more time than expected.
STEP 04
Mould-making: a dedicated production tool for each shape
After approving the master, we plan the mould box, parting lines and casting path, then make the silicone mould. We must avoid trapping air around text, fine lines and deep recesses. After curing, we open the mould, remove the master and inspect the cavity. Poor parting, bubble-damaged detail or incomplete silicone coverage may require a new mould.
WHY REVISIONS TAKE TIME
A small shape change can mean more than editing one file
Once the master or mould is complete, changing the logo, proportions or thickness, or adding raised or recessed details, usually means returning to modelling. We then print and finish a new master, remake the silicone mould and run another test cast. The change affects a manufacturing process, not just a position on screen.
STEP 05
Material preparation and air removal: controlling every batch
Before casting, we weigh and mix materials by batch and control their flow. Mixing too quickly introduces air; mixing too slowly can shorten working time. Detailed moulds need careful air removal and filling. These controls directly affect surfaces, edges and the completeness of fine details.
STEP 06
Casting: a simple-looking step that relies on experience
We slowly fill the mould in a way suited to its shape, allowing air to escape from high points and narrow gaps. Logo recesses, text strokes, sharp corners and thin edges can trap bubbles. Unsuitable filling speed, mould position or vibration may cause chips, holes, surface marks or missing detail.
STEP 07
Demoulding and finishing: leaving the mould is only the beginning
Pieces must reach the right state before demoulding. Removing them too early can cause distortion or chips; leaving them too long may increase removal risks. We then remove flash, repair local defects, sand bases and rounded edges, clean dust and allow full drying. Each piece requires hands-on assessment before packing.
STEP 08
Inspection and packaging: the final presentation
We inspect contours, logos, surfaces, bases, chips and consistency, then assemble oils, EVA inserts, magnetic gift boxes, sleeves or branded print. Insert dimensions, product orientation and transport protection must also be confirmed to create a complete, orderly unboxing experience.
Which stages can a revision affect?
| Requested change | Work that may be affected |
|---|---|
| Logo size, typeface or depth | Remodelling, reprinting the master, remaking the silicone mould and test casting |
| Shape proportions, thickness or dimensions | Structure and balance, material quantity, drying, packaging and EVA insert dimensions |
| New recesses, openings or undercuts | Parting method, mould life, demoulding difficulty and breakage rate |
| Colour or surface finish | Material testing, batch colour variation, finishing and acceptance criteria |
| Gift-box arrangement or product orientation | Box structure, insert tooling, oil-bottle position, printing and transport protection |
PROJECT TIMELINE
Plan for both sampling and production
Start earlier for large projects, multiple shapes, special printing or a fixed arrival date. The confirmed quotation and schedule determine the actual delivery time.
Prepare these six details before requesting a quote
- Vector logo files or clear shape references (AI, PDF or SVG preferred)
- Target dimensions and requirements for the front, sides and back
- Order quantity and intended use
- Preferred arrival date and delivery destination
- Gift-box, oil, insert and printing requirements
- Elements that must stay unchanged and details that can be adapted for production
FROM IDEA TO A GIFT WORTH KEEPING
We want your recipients to receive a carefully made brand piece that rewards a closer look and is worth keeping.
Share the shape, quantity, preferred arrival date and packaging requirements. We will assess feasibility, sampling and delivery based on the production process.
Discuss your gift project
